China Home Elevator Factory introduces the elevator usage guide

1. The elevator is generally at one end of the corridor, the door frame is very deep, and the door is silver-gray stainless steel iron.
   　
   2. When there are multiple elevators on the floor, it will be divided into single-story and double-deck elevators. The floor number is posted on the door brow, and the elevator can be selected according to the floor number to go to.
   　
   3. On the wall next to the staircase door, there is a round button for going up or down, and there is a triangle pointing inside.
2. After pressing one of the buttons, the indicator light inside turns on, indicating that you want to go up or down from the current station position.
3. At this time, stand outside the door and wait for the elevator to come. Be careful not to stand on the elevator door sill. The button has the direction and floor of the elevator running.
4. The elevator will open at the door. If you are going in the direction you want to go, you can go in. Pay attention to the first down and then up. People who come out should let them come out first.
5. There is a row of buttons next to the door on the right side of the elevator. After entering, press the floor you want to go to, and then find a place to stand.
6. The top of the button shows the operating status of the elevator on which floor. There are two buttons for opening and closing the door. The elevator will not go if the door is closed.
7. After the door is closed, the elevator starts to move, and when it reaches the floor, it will stop and open. Don’t be too anxious if you notice that your floor is going down again.