With the improvement of people's living standards. People began to raise a level of living requirements, especially considering installing home elevators. Therefore, it is necessary to measure some necessary dimensions when installing home elevators. The following China Elevator Lifts Factory will introduce the reserved size range of home elevators:
The shaft dimensions of home elevators and villa elevators are:
The small shaft with a width of 1250MM and a depth of 1450MM, the elevator car can be made with a width of 750MM and a depth of 1100MM; a wide shaft of 1500MM and a depth of 1450MM, the elevator car can be made with a width of 900MM and a depth of 1000MM; 1000MM. The choice of the elevator is based on the use of permanent magnet synchronous main engine as the lowest usage fee, followed by VVVF is better, hydraulic pressure is the highest. The safety system must choose a two-way safety system. If you want to be safer, you can add an automatic rescue system.
Nowadays, more and more people are installing elevators in their homes, especially those self-built houses that are also very tall. They all need to install an elevator, which is convenient for us to go up and down the stairs. The specifications will be relatively small.
In fact, the actual size depends on the size of your home. From the perspective of the size of the home elevator, it is generally necessary to reserve a space of 600x1600mm. From the clearance size of the hoistway, 1450x1450mm is the smallest size and the load capacity is About 500 kilograms, it can take up to three people. At the same time, it should be noted that the construction of the shaft structure, as well as columns, walls, etc., meet the daily needs, and cannot be smaller than this size.
Elevators must be branded so that such products can be used with confidence. You need to know how many things will happen to some products that are not of good quality, and you need to maintain them regularly.